Marabu StarLam 1600R Bedienungsanleitung PDF herunterladen

Page 1/2

Marabu GmbH & Co. KG ⋅ Phone: +49 7141 6910 ⋅ info@marabu-inks.com ⋅ www.marabu-inks.com

Marabu

Field of application

Substrates

Marashield WA-FXG is particularly suited for

coating UV or solvent-based inkjet prints on

PCV materials.

Field of use

Marashield WA-FXG was developed as a

protective coating for UV or solvent-based

inkjet prints. It can be applied either manually

or automatic, e. g. with the StarLam Liquid

Laminator 1600R.

A basic requirement is good adhesion of the

inkjet ink to the substrate.

The ink film must dry sufficiently before

Marashield WA-FXG is applied.

Please generally allow solvent-based prints to

dry for 24 h before coating.

Insufficiently dried prints may result in flow

problems if varnished with Liquid Coatings.

Since all the print substrates mentioned may be

different in printability even within an

individual type, preliminary trials are essential

to determine the suitability for the intended

use.

Characteristics

Ink Adjustment

Marashield WA-FXG should be stirred

homogeneously before printing and if

necessary during production.

Drying

The drying parameters must be determined

individually. They depend on the coating

thickness and will vary, especially if the Liquid

Coating is applied manually with roller,

sponge, mop, or spray gun. In general, the

minimum drying time is 1 h at ambient

temperature, and complete drying can be

expected after 24 h.

Sufficient drying must be ensured before the

substrate can be rolled up.

Fade resistance

Marashield WA-FXG is suitable for outdoor

exposure of up to 3 years, referred to the

middle European climate. The fade resistance

of the finished product, however, also depends

on the digital printing ink and the substrate

used.

Resistance

Marashield WA-FXG is alkali resistant and

furthermore resistant against acids, alcohol

(40%), and gasoline.

The chemical and mechanical resistance

increases with the thickness of the applied

layer.

Range

Marashield WA-FXG flexible, glossy

Cleaning

Marashield WA-FXG can be cleaned with

water. Do not empty large amounts into

drains. Left-over varnish should be left to dry

in the container before disposal in domestic

waste.

Technical Data Sheet

Marashield

FXG

Water-based liquid laminate for

automatic or manual application

High level of protection, non-yellowing,

flexible, glossy, suited for long-term

outdoor use

Vers. 01

2014

1. Apr

1 2

Page 1/2 1
Technical Data Sheet 1

Inhaltsverzeichnis

Seite 1 - Technical Data Sheet

Page 1/2 Marabu GmbH & Co. KG ⋅ Phone: +49 7141 6910 ⋅ [email protected] ⋅ www.marabu-inks.com Marabu Field of application Substrat

Seite 2

Page 2/2 Marabu GmbH & Co. KG ⋅ Phone: +49 7141 6910 ⋅ [email protected] ⋅ www.marabu-inks.com Technical Data Sheet Marashield WA-FX

Kommentare zu diesen Handbüchern

Keine Kommentare

Marabu StarLam 1600R Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Laminatoren Marabu StarLam 1600R herunter. Marashield WA-FXG Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern